What Does Camming A Car Do

What Does Camming A Car Do

Rev your engines and prepare to dive into the captivating world of automotive wizardry, where the term “camming a car” holds the key to unlocking hidden horsepower, unleashing the symphony of mechanical symphonies, and setting your vehicle on a course to adrenaline-pumping glory.

If you’ve ever wondered what it means to “cam” a car and how this mystical process can transform your humble automobile into a roaring beast of the road, then fasten your seatbelt and get ready to embark on an exhilarating journey into the heart of automotive performance enhancement.

Camming a car is not just about tweaking an engine; it’s about igniting a passion for power and precision that fuels the dreams of every gearhead and leaves the uninitiated in awe of the automotive artistry that lies beneath the hood. So, are you ready to demystify the magic of camming and unleash the untamed potential of your ride? Let’s rev it up and find out.

What Does Camming A Car Do

What Does Camming A Car Do

Camming a car involves enhancing its performance by modifying the camshaft, a crucial component in the engine. This modification can unleash more power, improve fuel efficiency, and enhance the overall driving experience.

Understanding the Camshaft

The camshaft is a crucial component within an internal combustion engine, responsible for orchestrating the intricate dance of the engine’s intake and exhaust valves.

This elongated shaft features carefully shaped lobes or cams that, as the engine runs, interact with various valvetrain components. These components include lifters or tappets, each corresponding to a particular valve.

The camshaft’s primary role is to translate the rotational motion of the engine’s crankshaft into the precise reciprocating motion required for valve operation.

The operation of the camshaft is tightly interwoven with the four-stroke cycle of the engine: intake, compression, power, and exhaust. Each cam lobe is meticulously designed to control the timing of valve opening and closing, as well as the extent to which the valves are lifted from their seats.

The position and shape of these lobes determine not only when a valve opens and closes but also the duration and lift of each valve event.

The location of the camshaft varies, with overhead camshaft (OHC) and pushrod (OHV) configurations being the most common. In OHC engines, the camshaft is positioned above the cylinder head and directly actuates the valves, while OHV engines feature a camshaft positioned within the engine block, connected to the valves via pushrods and rocker arms.

The type of camshaft used can significantly impact engine performance and characteristics. Several variations exist, including flat tappet camshafts, roller camshafts, hydraulic camshafts, and solid camshafts. Each type has distinct advantages and trade-offs related to performance, durability, and maintenance.

What Does Camming a Car Mean?

Camming a car refers to the process of modifying or upgrading the vehicle’s camshaft, which is a critical component of the engine’s valvetrain. This modification involves replacing the stock camshaft with one that has different specifications, such as altered camshaft profiles, lobes, or timing.

The primary objective of camming a car is to enhance its engine performance, although the specific goals can vary widely depending on the desired outcomes. Here are the key aspects of what camming a car entails.

Camshaft Modification

Camming a car typically involves the replacement or reprofiling of the stock camshaft with one designed to optimize engine performance in a specific way.

Camshaft modifications can involve changing the camshaft’s lobe profiles, lift, duration, and other parameters to achieve specific performance goals.

Performance Enhancement

Camming is often undertaken to boost the engine’s power and torque output. This can result in increased acceleration and top speed, making the car more suitable for racing or spirited driving.

By modifying the camshaft, enthusiasts can fine-tune the engine’s performance characteristics to meet their requirements, whether it’s more low-end torque, higher RPM power, or a balance between the two.

Improved Fuel Efficiency

In some cases, camming a car is aimed at enhancing fuel efficiency. A well-chosen camshaft modification can optimize the engine’s air-fuel mixture and combustion efficiency, leading to better gas mileage.

Altered Engine Sound

Camshaft modifications can influence the sound of the engine, with some enthusiasts seeking a more aggressive or distinctive exhaust note. This can be particularly appealing to those who appreciate the auditory aspect of driving.

Valve Timing and Lift Changes

Camming a car involves adjusting valve timing and lift profiles. These modifications influence when the intake and exhaust valves open and close, as well as how much they open, impacting airflow and combustion within the engine.

Considerations for Specific Goals

The specific goals of camming a car should guide the choice of camshaft modifications. For instance, a racing application might prioritize high RPM power, while a daily driver might focus on low-end torque and fuel efficiency.

Professional vs. DIY Camming

Camming a car can be performed by professional mechanics or skilled enthusiasts. The choice often depends on the complexity of the modifications and the level of expertise required.

Engine Tuning and Calibration

After camming, the engine must be tuned and calibrated to ensure that the modifications work in harmony with other engine components. This step is crucial to optimize performance and prevent issues like engine knocking or poor fuel economy.

Maintenance and Warranty Considerations

It’s essential to consider the potential impacts on engine longevity and warranty coverage when camming a car. Modifications can affect the durability of other engine components, and they may void certain warranties.

Camshaft Design and Profiles

Camshaft design and profiles play a crucial role in the performance and behavior of an engine. Different camshaft profiles can be selected or designed to achieve specific engine characteristics. In this section, we will delve into the various aspects of camshaft design and profiles.

Different Camshaft Profiles

Stock Camshaft

Description: Stock camshafts are the factory-installed camshafts that come with the vehicle. They are designed to provide a balance between performance, fuel efficiency, and emissions compliance.

Characteristics: Stock camshafts are often conservative in terms of lift and duration to meet emissions regulations and ensure smooth, reliable operation.

Performance Camshaft

Description: Performance camshafts are designed to enhance engine output, with a focus on power and torque gains.

Characteristics: They feature increased lift and duration compared to stock camshafts, allowing for improved airflow and higher RPM power. Performance camshafts are popular in racing and high-performance applications.

Racing Camshaft

Description: Racing camshafts are engineered for maximum power and performance in racing scenarios.

Characteristics: These camshafts have aggressive profiles with high lift and extended duration to optimize engine performance at high RPMs. They may sacrifice low-end torque for high-end power.

Economy Camshaft

Description: Economy camshafts prioritize fuel efficiency and low-end torque for everyday driving.

Characteristics: They have conservative lift and duration to maintain smooth, efficient operation at lower RPMs, making them ideal for daily drivers and vehicles focused on saving fuel.

Read More About  How To Turn Off D3 On Honda CR-V

Hydraulic vs. Solid Camshafts

Description: Camshafts can be either hydraulic or solid, referring to the type of lifters used.

Hydraulic Camshafts: Utilize hydraulic lifters, which self-adjust valve lash, reducing the need for frequent maintenance. They are common in street-driven vehicles.

Solid Camshafts: Require periodic valve lash adjustments but are favored in racing applications for their precision and ability to handle high RPMs.

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Table of Contents

The Relationship Between Camshaft Design and Engine Performance

Valve Lift and Duration

Valve lift determines how far the valves are raised off their seats, affecting the volume of air/fuel mixture that can enter the cylinders. Duration refers to the amount of time the valves are held open during each cycle. Different profiles alter lift and duration to optimize performance for specific purposes.

Read More About  Are Tire Pressure Sensors Covered Under Warranty


Overlap is the period when both the intake and exhaust valves are open simultaneously. It influences exhaust scavenging and can impact torque and power characteristics.

Lobe Separation Angle (LSA)

LSA defines the angular distance between the centerlines of the intake and exhaust lobes on the same camshaft. It affects the engine’s idle quality and power band.

Considerations for Selecting the Right Camshaft

Engine Type and Purpose

The choice of camshaft depends on the engine’s intended use, whether it’s a daily driver, race car, or a specialty vehicle.

Vehicle Characteristics

Factors like vehicle weight, transmission type, and rear-end gearing influence camshaft selection.

Budget and Maintenance

Consideration of the costs associated with camshaft modifications and the maintenance requirements, especially for solid camshafts.

Professional Consultation

Seek advice from engine builders or performance experts to select the ideal camshaft profile to meet specific performance goals while considering other engine modifications and tuning requirements.

Camming a Car for Performance

Camming a car for performance is a popular practice among automotive enthusiasts and racers seeking to unleash the full potential of their vehicles. By modifying the camshaft, individuals can fine-tune their engines to deliver increased power, torque, and enhanced performance characteristics. Here’s a comprehensive look at camming a car for performance.

Enhancing Engine Power and Torque

Increased Power Output

Upgrading the camshaft to a performance or racing profile allows for more aggressive valve timing and lift, resulting in greater power production. The camshaft controls the amount of air and fuel that enters the cylinders, contributing to increased horsepower.

Optimizing Torque

Camshaft modifications can be tailored to boost low-end torque, providing improved off-the-line acceleration and responsiveness. Adjusting the camshaft profile influences the engine’s torque curve, tailoring it to specific performance requirements.

Factors to Consider When Upgrading the Camshaft

Specific Performance Goals:

Determine the desired outcome of the camshaft upgrade, whether it’s focused on high-end power, low-end torque, or a balanced approach. Consider how the camshaft selection aligns with other engine modifications, such as intake and exhaust upgrades.

Engine Compatibility

Ensure that the chosen camshaft is compatible with the engine and valvetrain components, such as lifters, pushrods, and springs.
Overly aggressive cam profiles may necessitate additional modifications, such as valve spring upgrades.

Compression Ratio and Fuel Type

Consider the engine’s compression ratio and fuel type, as these factors influence camshaft selection.
Higher compression ratios may favor camshafts with more duration and lift.

Transmission and Rear-End Gear Ratio

The vehicle’s transmission and rear-end gear ratio play a role in how well the engine’s power is transmitted to the wheels.
Ensure compatibility and optimization for the entire drivetrain.

Impact of Camming on Engine Sound and Emissions

Altered Engine Sound

Camshaft modifications can significantly influence the engine’s sound. More aggressive cam profiles produce a distinct and often louder exhaust note, contributing to the vehicle’s overall character. This auditory aspect of camming is appealing to many performance enthusiasts.

Emissions Considerations

Performance camshafts with aggressive profiles may impact emissions output and compliance with environmental regulations. Some regions have strict emissions standards, which should be taken into account during the modification process.

Read More About  How Long Does It Take For Brake Cleaner To Evaporate

Tuning and Calibration

Engine Tuning

Camming a car for performance requires engine tuning to ensure that the modified camshaft works in harmony with the rest of the engine components. Fuel and ignition timing adjustments may be necessary to optimize performance and prevent issues like engine knocking.

Dyno Testing

The use of a dynamometer (dyno) is crucial for fine-tuning the engine’s performance. Dyno testing allows for real-time adjustments and the optimization of fuel and timing maps to achieve the desired power and torque curves.

Real-World Examples

Case Studies: Highlight real-world examples of vehicles that have undergone camshaft upgrades for performance enhancements.

Comparisons: Provide comparisons between stock and cammed engines, illustrating the improvements in power, torque, and overall performance.

Testimonials and Expert Opinions

Include testimonials from car enthusiasts who have successfully cammed their vehicles for improved performance and insights from performance experts regarding the benefits and considerations of camming a car.

Camming a Car for Fuel Efficiency

Camming a car for fuel efficiency involves modifying the camshaft to optimize the engine’s air-fuel mixture and combustion processes, ultimately leading to improved gas mileage. While camshaft upgrades are often associated with performance gains, they can also be tailored to enhance fuel economy. Here’s an in-depth look at camming a car for improved fuel efficiency.

How Camming Can Improve Fuel Efficiency

Optimized Valve Timing:

Camshaft modifications for fuel-efficiency focus on adjusting valve timing to maximize the efficiency of the engine’s combustion cycle. Proper timing ensures that the air-fuel mixture is burned more completely, reducing fuel wastage.

Reduced Throttle Response Lag:

Camshaft profiles can be tuned to minimize throttle response lag, ensuring the engine operates efficiently at lower RPMs. This responsiveness can result in less unnecessary fuel consumption when accelerating.

Enhanced Combustion Efficiency:

Camshaft modifications can help achieve more efficient air-fuel mixture combustion, reducing unburned fuel and minimizing emissions. Enhanced combustion efficiency contributes to fuel savings.

Balancing Performance and Efficiency

Consider the Vehicle’s Purpose:

Camshaft selection should align with the car’s intended use. Efficiency-focused cam profiles are ideal for daily drivers and long-distance commuters.

Combining Performance and Efficiency:

Some camshaft profiles strike a balance between performance and fuel efficiency. These profiles can provide a moderate power boost without sacrificing gas mileage significantly.

Complementary Modifications:

Camming for fuel efficiency may involve additional modifications such as optimizing the intake and exhaust systems to create a more efficient airflow path.

Real-World Examples

Case Studies: Provide real-world examples of vehicles that have undergone camshaft upgrades for improved fuel efficiency. Fuel Efficiency Comparisons: Highlight comparisons between stock and cammed engines, showcasing the improvements in gas mileage and overall efficiency.

Impact on Emissions

Emissions Reduction: Camshaft modifications aimed at improving fuel efficiency often result in reduced emissions, making the vehicle more environmentally friendly.

Professional Tuning and Calibration

Engine Tuning: After camming for fuel efficiency, engine tuning is crucial to ensure that the vehicle operates efficiently.

Economy-Oriented Maps: Tuning should include the use of economy-oriented maps that optimize fuel delivery and ignition timing for lower fuel consumption.

Real-World Examples of Fuel Efficiency Improvements

Share examples of vehicles or studies where camming for fuel efficiency led to tangible improvements in gas mileage and a reduction in fuel costs.

User Experiences

Include testimonials from car owners who have successfully improved their vehicle’s fuel efficiency through camshaft modifications.

DIY vs. Professional Camming

When considering camming a car, one of the critical decisions is whether to perform the camshaft modifications yourself (DIY) or enlist the services of a professional mechanic or shop. This section explores the advantages and disadvantages of both approaches.

DIY Camming


Cost Savings: DIY camming typically costs less than professional services as you can save on labor fees.

Personalization: You have full control over the camshaft selection, modifications, and the overall process, allowing you to personalize the car to your preferences.

Learning Opportunity: DIY camming can be a valuable learning experience, helping you understand your vehicle’s intricacies and boosting your automotive knowledge.

Flexibility: You can work on your own schedule and experiment with different camshaft profiles and adjustments.


Expertise Required: Camming is a complex task that demands knowledge of engines, valve timing, and related components. Inadequate expertise can lead to costly mistakes.

Tools and Equipment: You’ll need specialized tools and equipment for camshaft installation, which may require a significant initial investment.

Time-Consuming: Camshaft modifications can be time-consuming, and mistakes may require rework, extending the project duration.

Warranty Concerns: Some vehicle warranties may be voided if DIY camming leads to engine issues or damage.

Professional Camming


Expertise: Professional mechanics have the necessary knowledge and experience to carry out camshaft modifications accurately and efficiently.

Quality Assurance: Professional shops are equipped with tools and equipment to ensure precision and proper installation.

Warranty Protection: Reputable shops may offer warranties on their work, providing peace of mind regarding the quality of the modifications.

Time Savings: Professional camming is typically faster, reducing downtime for your vehicle.


Cost: Professional camming services can be expensive, with labor fees adding to the overall expense.

Less Personalization: Professionals may follow a standard procedure and may not accommodate as much personalization as a DIY approach.

Less Learning Opportunity: If you’re interested in learning about camming, professional services may not provide the hands-on experience of DIY.

Communication and Trust: Ensuring that your objectives are well-communicated and understood by the professionals is crucial to achieving the desired outcomes.

Safety and Warranty Considerations

Safety: Both DIY and professional camming require adherence to safety practices. DIYers must take extra precautions, while professionals are expected to follow industry safety standards.

Warranty Concerns: DIY camming can potentially void vehicle warranties, so it’s essential to consider the implications, while professional services may offer warranty coverage on their work.

Project Complexity

DIY Complexity: Consider the complexity of the camming project, including the need for additional modifications and tuning. More complex projects may benefit from professional expertise.

Professional Expertise: Professional services are recommended for intricate or high-performance camming projects where precision and experience are crucial.

Decision Factors

Skill Level: Evaluate your automotive knowledge and skills. DIY camming requires a high level of expertise.

Project Scope: Consider the complexity and goals of the camming project. A basic upgrade may be suitable for DIY, while complex racing applications may warrant professional services.

Budget: Assess your budget and determine whether it allows for professional services or if DIY is more cost-effective.

Time Availability: DIY camming can be time-consuming, so ensure you have the time to complete the project properly.

Vehicle Warranty: Check your vehicle warranty terms and whether they allow for DIY modifications.

Deciding between DIY and professional camming ultimately depends on your level of expertise, project complexity, budget, and personal preferences. Careful consideration of these factors will help you choose the approach that aligns best with your needs and goals.

The Camming Process

The process of camming a car involves the strategic modification of the camshaft to achieve specific performance or efficiency goals. Below, we outline the step-by-step process of camming a car, from selecting the right camshaft to engine tuning.

Selecting the Right Camshaft

Define Objectives: Determine the purpose of the camshaft upgrade, such as improving performance, fuel efficiency, or altering the engine sound.

Research and Consultation: Research different camshaft profiles and consult with experts or enthusiasts who have experience with camming. Consider their recommendations.

Choose a Camshaft: Select a camshaft that aligns with your goals, vehicle type, and engine characteristics. Consider the intended use (daily driving, racing, etc.).

Tools and Equipment

Gather Tools: Acquire the necessary tools and equipment for camshaft installation, which may include camshaft installation tools, a torque wrench, valve spring compressor, and more.

Camshaft Removal

Disconnect Battery: Begin by disconnecting the vehicle’s battery to ensure safety.

Remove Timing Belt/Chain: If applicable, remove the timing belt or chain to access the camshaft.

Remove Valve Covers: Take off the valve covers to expose the camshaft and valvetrain components.

Unbolt Camshaft: Remove the bolts or fasteners securing the camshaft in place.

Careful Extraction: Carefully extract the old camshaft, making sure not to damage the cam lobes or valvetrain.

Camshaft Installation

Lubrication: Lubricate the new camshaft with assembly lube to reduce friction during initial startup.

Alignment: Ensure the camshaft is correctly aligned with the timing marks and other engine components.

Bolt Camshaft: Secure the new camshaft in place by bolting it to the camshaft gear or sprocket.

Tension and Timing: Set the timing belt/chain tension and timing according to manufacturer specifications.


Reattach Valve Covers: Put the valve covers back on and ensure proper sealing to prevent oil leaks.

Reconnect Timing Belt/Chain: Reconnect the timing belt/chain and align it correctly with the camshaft and crankshaft.

Reconnect Battery: Reconnect the vehicle’s battery.

Engine Tuning and Calibration

Engine Management System: Adjust the engine management system to accommodate the new camshaft. This includes modifications to fuel and ignition timing maps.

Dyno Testing: Perform dyno testing to fine-tune the engine’s performance and ensure the camshaft modifications are delivering the desired results.

Safety and Quality Checks

Inspect for Leaks: Check for any oil or coolant leaks and address them promptly.

Valvetrain Check: Inspect the valvetrain components to ensure they are functioning correctly, and valve lash is properly adjusted.

Road Testing

Test Drive: Take the vehicle for a test drive to evaluate the performance and drivability of the modified engine.

Data Collection: Monitor the engine parameters, such as temperature, oil pressure, and power output, during the test drive to ensure everything is within the desired range.

Post-Installation Maintenance

Periodic Checks: Regularly inspect the camshaft, valve lash, and other related components to ensure they are functioning as intended.

Oil and Filter Changes: Follow a maintenance schedule that includes regular oil and filter changes to maintain engine health.


Keep Records: Maintain a record of the camshaft modifications, tuning adjustments, and any maintenance performed. This documentation can be valuable for troubleshooting and future reference.

The Impact of Camming on Other Engine Components

Camming a car by modifying the camshaft doesn’t just affect the camshaft itself; it has a significant impact on various other engine components. Understanding these effects is crucial when considering camshaft upgrades. Here’s an overview of how camming can influence other engine parts.

Valvetrain Components

Valves: Camshaft modifications can lead to increased valve lift and duration, affecting how the valves open and close. This change in valve operation can impact valve longevity and may necessitate adjustments to valve seats.

Lifters (Tappets): More aggressive cam profiles may exert additional force on lifters, which could lead to increased wear and potentially require the use of high-performance lifters or upgraded components.

Valve Springs: Camshaft modifications that increase valve lift can put additional stress on valve springs. It might be necessary to upgrade to stronger valve springs to maintain valve control and prevent valve float.

Pistons and Connecting Rods

Valve-to-Piston Clearance: Changes in valve lift and duration can affect the clearance between the valves and pistons. If this clearance is too close, it can result in contact between the valves and pistons, leading to engine damage. This requires careful consideration during camshaft selection and installation.

Increased Power and Stress: Upgraded camshafts can generate more power, which places increased stress on the pistons and connecting rods. Depending on the extent of the camming modifications, it might be necessary to reinforce these components to handle the additional load.

Timing Components

Timing Belt or Chain: Adjusting valve timing can affect the timing belt or chain. It is important to ensure proper alignment and tensioning to prevent timing-related issues, such as belt or chain breakage.

Crankshaft Timing Gear: The camshaft is linked to the crankshaft through timing gears or sprockets. Any changes in camshaft timing can affect the overall engine timing, necessitating precise adjustments.

Exhaust System

Exhaust Flow: Altered valve timing can change exhaust flow characteristics. This may require corresponding adjustments to the exhaust system, such as modifications to the headers or exhaust manifold, to optimize exhaust gas scavenging.

Exhaust Noise: More aggressive cam profiles can lead to a louder exhaust note. Consideration should be given to local noise regulations and personal preferences for the vehicle’s sound.

Oil and Lubrication

Oil Flow: Aggressive cam profiles may require higher oil flow rates to adequately lubricate valvetrain components. The engine’s oil system may need adjustments or the use of specific high-performance oil pumps.

Oil Viscosity: The choice of engine oil viscosity can affect how well the camshaft and valvetrain components are lubricated. It’s important to select the right oil grade for the specific camshaft modifications.

Cooling System

Heat Generation: Increased power output from camshaft upgrades can lead to higher heat generation. The cooling system must be able to dissipate this additional heat effectively to prevent engine overheating.

Transmission and Drivetrain

Drivability: The altered power delivery characteristics of a cammed engine can affect drivability, especially with manual transmissions. Upgraded clutches or torque converters may be necessary to handle the additional power.

Transmission Cooling: Increased power can result in higher transmission temperatures. Adequate cooling is essential to prevent overheating and potential damage.

Frequently Asked Questions (FAQ) about “What Does Camming A Car Do?”

What is camming a car?

Camming a car refers to the process of changing or upgrading the camshaft in the engine. The camshaft controls the opening and closing of the engine’s valves, affecting performance.

Why would I want to cam my car?

Camming a car can enhance its performance by improving horsepower, torque, and engine efficiency. It’s often done to increase the car’s power output and modify its engine characteristics.

What is a camshaft, and how does it work?

A camshaft is a rotating shaft in the engine that controls the timing and duration of the engine’s valve openings. It’s a crucial component for managing the intake and exhaust of air and fuel in the engine.

What are the benefits of camming a car?

Camming a car can result in increased horsepower and torque, improved throttle response, and a more aggressive engine sound. It can also allow for fine-tuning of the engine’s performance characteristics.

Are there any drawbacks to camming a car?

Yes, camming a car may affect low-end power and drivability, and it can be expensive and time-consuming. It might also void warranties and potentially reduce fuel efficiency.

Can I cam my car myself, or should I consult a professional?

Camming a car is a complex process that often requires advanced automotive knowledge and tools. It’s recommended to consult with a professional mechanic or engine tuner for this modification.

What types of camshafts are available for cars?

There are various types of camshafts, including hydraulic, solid, roller, and more. Each type has its own advantages and is chosen based on the specific goals of the car modification.

How do I choose the right camshaft for my car?

The choice of a camshaft depends on your car’s engine, its intended use (e.g., street, racing), and your desired performance goals. Consult with an expert to select the appropriate camshaft for your needs.

Will camming my car affect emissions and legal compliance?

Modifying the camshaft can potentially affect emissions, and in some cases, it may lead to non-compliance with local or national emissions regulations. Be sure to check the legal requirements in your area.

What other modifications should I consider when camming my car?

Camming a car is often part of a larger performance modification plan. You may need to upgrade other components such as intake, exhaust, and tuning to maximize the benefits of a new camshaft.

How do I maintain a cammed car, and are there any special considerations?

Cammed cars may require more frequent maintenance and tuning to ensure optimal performance. Regular check-ups and tune-ups are crucial to keep the engine in good condition.

Can camming a car be reversed if I’m not satisfied with the results?

While it’s possible to reverse camshaft modifications, it can be costly and time-consuming. It’s essential to thoroughly research and consult with experts before making this decision.


In conclusion, camming a car involves optimizing the camshaft profile to enhance engine performance, power output, and fuel efficiency.

This crucial component plays a pivotal role in regulating the timing of the intake and exhaust valves, ultimately influencing an engine’s overall performance.

Whether it’s for racing or everyday driving, understanding and carefully tuning the camshaft can significantly impact a vehicle’s capabilities.

By customizing the cam profile to suit specific needs, car enthusiasts and mechanics can unlock a world of potential in their engines, achieving the desired balance between power and efficiency for a more thrilling and satisfying driving experience.






Leave a Reply

Your email address will not be published. Required fields are marked *